If you suffered a chemical burn in California, from a cleaning product, a pool chemical, a drain opener, an industrial solvent, wet concrete, a hair or skin treatment, or a chemical you handled on the job, you may have more than one claim, and the one most people are told about is usually the smallest. A worker burned on the job is told that workers’ compensation is the only remedy. That is true as against the employer. It is not true as against the company that made the chemical, the company that owned the property where it was used, or a contractor whose negligence caused the exposure. Those are separate claims, California law expressly allows them alongside workers’ comp, and they pay what comp never does. Here is how the claims line up for workplace and non-workplace chemical burns, and what to do while the evidence still exists.
Chemical burns are different
Thermal burns stop when the heat source is removed. Chemical burns keep going as long as the chemical is on the skin or in the eye, and some agents, including alkalis like drain openers, lye and wet concrete, penetrate deeper over time and do more damage than they first appear to. Acid burns tend to be immediately painful; alkali burns can feel mild at first and be severe hours later. Eye exposures can cause permanent vision loss within minutes. Inhalation of fumes causes airway injury that may not show until later. All of which means that the medical record from the first visit should name the chemical, the concentration if known, and the duration of contact, because the defense will later argue the exposure was brief and minor.
If the burn happened at work
Workers’ compensation covers the medical treatment and part of your wages without regard to fault, and it is the exclusive remedy against your employer under Labor Code sections 3600 and 3602. But Labor Code section 3852 preserves your right to sue any third party whose negligence or defective product caused the injury, and the two claims run at the same time. The third parties in a workplace chemical burn case are usually one or more of these.
The manufacturer or distributor of the chemical. California’s strict product liability law, from Greenman v. Yuba Power Products, applies to chemicals as to any product. The most common theory is failure to warn: a label that did not adequately warn of the burn hazard, did not state the required protective equipment, or did not give correct first aid instructions. Design defect applies when a safer formulation was available for the same use. Packaging defect applies when a container failed, leaked or sprayed. The Safety Data Sheet, which the manufacturer must provide and the employer must keep, is the first document obtained, and it is compared to the label and to what actually happened.
The property owner, when you were working at someone else’s site. A general contractor or property owner who controlled the premises and created or allowed the hazard can be liable to a contractor’s injured employee. California’s Privette doctrine limits these claims, but it has recognized exceptions: when the hirer retained control over the work and exercised it negligently, and when the hirer knew of a concealed hazard and failed to warn. A building owner who sent a cleaning contractor’s workers into a room with an unlabeled drum of acid falls into the second.
Another contractor on the site. If a different company’s employee mixed the chemicals, left them unlabeled, or sprayed them where you were working, that company is a third party and its policy responds.
The comp carrier has a lien on any third-party recovery under Labor Code sections 3856 and 3860, reduced by its share of attorney’s fees and by any employer fault, and it is negotiable. Our article on car accidents while driving for work explains the lien in detail, and it works the same way here.
If the burn happened outside work
For a consumer burned by a product at home, at a pool, at a salon, at a gym or at a store, the claims are product liability against the manufacturer and distributor, and premises liability against whoever controlled the place and the chemical. A customer burned by a cleaning agent a store employee was spraying in the next aisle has a claim against the store. A homeowner burned by a drain product whose container failed has a claim against the manufacturer and the retailer that sold it. A salon client burned by a chemical relaxer or bleach applied negligently has a claim against the salon and the stylist, and sometimes the product maker; our article on salon chemical burns covers that in detail. A swimmer burned by improperly balanced pool chemicals or a pool worker’s spill has a claim against the pool operator.
The product itself and its container must be kept. Photograph the label, the lot number, the container and whatever failed, and do not throw it away or return it. If the chemical was applied by someone else, find out exactly what it was and get the container or a photograph of it that day.
Proof
The chemical’s identity and concentration, from the label, the Safety Data Sheet or the business’s purchase records. How you were exposed, and for how long before it was washed off. The warnings on the label, compared to what the hazard actually was. The protective equipment that was provided, or not. Prior incidents with the same product or at the same site. Cal/OSHA records, if the injury was reported, which an employer must do for a serious injury. The treating physician’s description of the burn depth and the agent. Photographs of the injury from the first day onward, because chemical burns evolve and the early photographs show what the defense will later minimize.
Treatment
Chemical burns are treated first by removing the chemical, with prolonged irrigation, and then like thermal burns according to depth: wound care, debridement, grafting for deep burns, and reconstructive surgery for scarring and contracture. Eye exposures go to an ophthalmologist immediately. Serious burns in the West San Fernando Valley are treated at the Grossman Burn Center at West Hills Hospital. Industrial exposures sometimes involve systemic toxicity requiring hospital monitoring. All of this, and the time away from work, is part of the claim.
Key points
Workers’ comp is the only remedy against your employer, but Labor Code 3852 preserves claims against the chemical’s manufacturer, the property owner and other contractors. Those claims pay for pain, full lost earnings and future care.
Failure to warn is the most common product theory. The Safety Data Sheet and the label are compared to what happened.
Property owners and general contractors can be liable under the exceptions to Privette: retained control and concealed hazards.
Keep the product and its container. Photograph the label and lot number. Photograph the burn from day one.
Alkali burns worsen over hours. Get the chemical named in the first medical record.
Frequently asked questions
My employer says I cannot sue anyone because I am getting workers’ comp. True? Only as to the employer. The manufacturer of the chemical, the owner of the site and other contractors are all separate, and the comp claim does not affect those rights.
I was not wearing gloves. Does that end the claim? It is a comparative fault argument that may reduce a recovery. It does not bar the claim, and if the employer or the site failed to provide or require protective equipment, that failure is part of the case.
The label had a warning. How can there be a failure to warn? A warning can be inadequate in content, prominence, language or instructions. A small-print caution on a product that causes full-thickness burns in seconds is often found inadequate.
How long do I have? Two years from the injury under Code of Civil Procedure section 335.1 for the product and premises claims. Workers’ comp has its own one-year filing rule and a 30-day reporting requirement. If a public entity owned the site, a government claim within six months.
Manoukian Law Firm, P.C., Chatsworth, California. Free consultation. No fee unless we win. Past results do not guarantee a similar outcome.




